Review No.: RR-99-004

June 6, 2000

6 June 2000

Review No.: RR-99-004

In the matter of a review, under subsection 76(2) of the Special Import Measures Act, of the order made by the Canadian International Trade Tribunal on June 5, 1995, in Review No. RR-94-004, continuing, without amendment, its order made on June 5, 1990, in Review No. RR-89-008, continuing, without amendment, the finding of the Anti-dumping Tribunal made on June 28, 1983, in Inquiry No. ADT-6-83, concerning:

CARBON STEEL WELDED PIPE IN THE NOMINAL SIZE RANGE 12.7 mm TO 406.4 mm (1/2 in. TO 16 in.) INCLUSIVE, IN VARIOUS FORMS AND FINISHES, USUALLY SUPPLIED TO MEET ASTM A53, ASTM A120, ASTM A252, ASTM A589 OR AWWA C200-80 OR EQUIVALENT SPECIFICATIONS, INCLUDING WATER WELL CASING, PILING PIPE, SPRINKLER PIPE AND FENCING PIPE, BUT EXCLUDING OIL AND GAS LINE PIPE MADE TO API SPECIFICATIONS EXCLUSIVELY, ORIGINATING IN OR EXPORTED FROM THE REPUBLIC OF KOREA

Order

The Canadian International Trade Tribunal, under the provisions of subsection 76(2) of the Special Import Measures Act, has conducted a review of its order made on June 5, 1995, in Review No. RR-94-004, continuing, without amendment, its order made on June 5, 1990, in Review No. RR-89-008, continuing, without amendment, the finding of the Anti-dumping Tribunal made on June 28, 1983, in Inquiry No. ADT-6-83.

Pursuant to subsection 76(4) of the Special Import Measures Act, the Canadian International Trade Tribunal hereby continues the order in respect of carbon steel welded pipe in the nominal size range 12.7 mm to 406.4 mm (1/2 in. to 16 in.) inclusive, in various forms and finishes, usually supplied to meet ASTM A53, ASTM A120, ASTM A252, ASTM A589 or AWWA C200-80 or equivalent specifications, including water well casing, piling pipe, sprinkler pipe and fencing pipe, but excluding oil and gas line pipe made to API specifications exclusively, originating in or exported from the Republic of Korea, with an amendment to exclude lightwall sprinkler pipe that meets the requirements of ASTM A135 and/or A795 with the following dimensions:

- non-threadable - nominal size of 1 1/4 in. and wall thickness of 0.076 in.; nominal size of 1 1/2 in. and a wall thickness of 0.076 in.; nominal size of 2 in. and wall thickness of 0.076 in.; nominal size of 2 1/2 in. and wall thickness of 0.076 in.; nominal size of 3 in. and wall thickness of 0.076 in.; and nominal size of 4 in. and wall thickness of 0.086 in.; and

- threadable - nominal size of 1 in. and wall thicknesses of 0.093 in. to 0.123 in.; nominal size of 1 1/4 in. and wall thicknesses of 0.093 in. to 0.131 in.; nominal size of 1 1/2 in. and wall thicknesses of 0.098 in. to 0.135 in.; and nominal size of 2 in. and wall thicknesses of 0.103 in. to 0.140 in.;

and subject to the condition that the pipe be stencilled to indicate that it is approved by the Factory Mutual Research Organization and is listed by Underwriters' Laboratories, Inc. and Underwriters' Laboratories of Canada.


Topic(s): 
Acts, Regulations, Policies & Decisions / Special Import Measures Act (SIMA)
Information Source: 
Canadian International Trade Tribunal (CITT)
Document Type: 
Email Article