Skip to main content

CITT Review of Hot-Rolled Carbon Steel Plate From China

 

The Canadian International Trade Tribunal, pursuant to subsection 76.03(1) of the Special Import Measures Act (SIMA), has conducted an expiry review of the order made on August 9, 2018, in expiry review RR‑2017‑004.

The Tribunal continues its order in respect of hot-rolled carbon steel plate* from the People’s Republic of China.

 

Please see the link for the full Order and reasons issued:

https://decisions.citt-tcce.gc.ca/citt-tcce/a/en/item/521234/index.do

 

*hot-rolled carbon steel plate and high‑strength low-alloy plate not further manufactured than hot-rolled, heat-treated or not, in cut lengths, in widths from 24 in. (+/- 610 mm) to 152 in. (+/- 3,860 mm) inclusive, and thicknesses from 0.187 in. (+/- 4.75 mm) to 4.0 in. (+/- 101.6 mm) inclusive, but excluding plate for use in the manufacture of pipe and tube (also known as skelp), plate in coil form, plate having a rolled, raised figure at regular intervals on the surface (also known as floor plate) and plate produced to American Society for Testing and Materials specifications A515 and A516M/A516, grade 70 (also known as pressure vessel quality plate) in thicknesses greater than 3.125 in. (+/- 79.3 mm),

 

 

Topic(s)

Special Import Measures Act (SIMA)
Disclaimer

The foregoing information is provided for informational purposes only and is not intended as, nor should it be considered, professional advice or a substitute for conducting your own thorough research and review. Before making any decisions or taking any action based on the information provided, you should conduct your own independent investigation and/or seek professional advice from a qualified expert in the relevant field. The CSCB disclaims all liability for actions taken or not taken based on the information provided.